Lake Shore 218S, Руководство пользователя

Страница: 85 / 112

Lake Shore Model 218 Temperature Monitor User’s Manual
Remote Operation 6-25
INPUT
Configure Input Control Parameter
Input: INPUT <input>, <off/on>
Returned: Nothing.
Remarks: Turns selected input on or off.
<input> Specifies which input to configure( 1-8 ).
<off/on> Disables/Enables input. 0 = Off, 1 = On.
Example: INPUT 4,0 - Input 4 is turned off and not scanned.
INPUT?
Query Input Control Parameter
Input: INPUT? <input>
Returned: <off/on> . Format: n[term]
Remarks: Returns selected input status. <input> specifies which input to query ( 1-8 ).
INTYPE
Configure Input Type Parameters
Input: INTYPE <input group>, <sensor type>
Returned: Nothing.
Remarks: Configures input type parameters for a group of inputs.
<input group> Specifies input group to configure. A = inputs 1-4 , B = inputs 5-8 .
<sensor type> Specifies input sensor type. Valid entries:
0 = 2.5V Diode 2 = 250 Ω Platinum 4 = 5k Ω Platinum
1 = 7.5V Diode 3 = 500 Ω Platinum 5 = Cernox
Example: INTYPE A, 0[term] - Sets Inputs 1-4 sensor type to silicon diode.
INTYPE?
Query Input Type Parameters
Input: INTYPE? <input group>
Returned: <sensor type> . Format: n[term]
Remarks: Returns input type parameters.
<input group> Specifies input group to query. A = inputs 1-4 , B = inputs 5-8.
<sensor type> Specifies input sensor type. Valid entries:
0 = 2.5V Diode 2 = 250 Ω Platinum 4 = 5k Ω Platinum
1 = 7.5V Diode 3 = 500 Ω Platinum 5 = Cernox
KEYST?
Query Keypad Status
Input: KEYST?
Returned: <keypad status>
. Format: n[term]
Remarks: Returns keypad status since the last KEYST? . 1 = key pressed, 0 = no key pressed.
KEYST? returns 1 after initial power-up.
KRDG?
Query Kelvin Reading for a Single Input or All Inputs
Input: KRDG? <input>
Returned: <Kelvin value> . Format: +nn.nnn[term]
Or if all inputs are queried:
<Input 1 Kelvin Value>,<Input 2 Kelvin Value>,<Input 3 Kelvin Value>,<Input 4 Kelvin
Value>,<Input 5 Kelvin Value>,<Input 6 Kelvin Value>,<Input 7 Kelvin Value>,<Input 8 Kelvin
Value>
. Format: +nn.nnn,+nn.nnn,+nn.nnn,+nn.nnn,+nn.nnn,+nn.nnn,+nn.nnn,+nn.nnn
Remarks: Returns the Kelvin reading for a single input or all inputs. <input> specifies which input(s) to
query. 0 = all inputs, 1-8 = individual input. NOTE: Use 0 (all inputs) when reading two or
more inputs at the maximum update rate of 16 rdg/s.