Laird Sentrius RG1 Series, Руководство по настройке

Страница: 22 / 27

https://www.lairdconnect.com/iot-devices/iot-sensors
22
© Copyright 2019 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
Figure 34: Default Node-RED Dashboard
When you run the node-RED application for the first time, notice that the MQTT client links are not connected, as indicated by
the yellow connecting or red disconnected symbol below them.
To establish an MQTT connection with the broker running on your AWS EC2 instance, you must set the MQTT Broker
configuration. The Broker configuration is the information required to connect to an MQTT Broker using the node-RED flow.
The connection allows the nodes to receive sensor device’s data from the Senet servers and display the information in the
dashboard.
To modify the nodes, follow these steps:
Click the hamburger menu ( ) in the top right corner, click Configure Nodes . (Figure 35)
Figure 35: Configuring nodes