Laird Sentrius RG1 Series, Руководство по настройке

Страница: 16 / 27

https://www.lairdconnect.com/iot-devices/iot-sensors
16
© Copyright 2019 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
Figure 23: Successfully connected to MQTT broker locally
Now that all the Keys/EUIs match between RS1xx sensor and Senet, the sensor should be able to join the Senet network.
Senet allows users to add a notification target to a LoRa device after it has joined (activated). The notification target should be
set to be the MQTT broker created in section 8:
Setting up MQTT Broker on Amazon AWS .
Power cycle the RS1xx by taking out battery and re-inserting it.
Verify that the end-device is updated with Joined status on the https://portal.senetco.io/#/home dashboard. You may need
to refresh the page.
Click the hamburger menu at the upper right corner of the device widget, and then click the gear icon. (Figure 24)
Figure 24: RS1xx activated on Senet
Click Notification Target tab and choose MQTT in Forward To . ( Figure 25 )