Laird Sentrius RG1 Series, Руководство по настройке

Страница: 21 / 27

https://www.lairdconnect.com/iot-devices/iot-sensors
21
© Copyright 2019 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
{"dev_ids":[" 0025CA0000000002","0025CA0000000004"], “degreesFahrenheit”:false}
Even if there is only one device, the array format (square brackets) is used.
The device ID is case sensitive and must exactly match the device ID in the Senet portal.
To change the temperature readings from Celsius to Fahrenheit, set the variable from false to true or vice versa
depending on the what is desired. False is the Default Setting.
When you’re done editing, save the file.
Figure 32: rs1xx-demo-config.json in a text editor
The dashboard module adds a set of nodes to the node-RED palette that provides a quick and effortless way to create a live
data dashboard.
In the prompt screen, enter the following command as shown in Figure 33:
node-red sentrius-rs1xx-demo.json
node-RED generates the dashboard based on the Flow file: sentrius-rs1xx-demo.json .
To close node-RED, press CTRL-C .
Figure 33: node-red-sentrius-rs1xx-demo.jso
Open a Chrome web browser to the address:
http://localhost:1880
. This launches the node-RED Integrated Development
Environment (IDE). ( Figure 34 )