Laird Nextreme NRC1200 Series Скачать руководство пользователя страница 26

Страница: 26 / 73

Symbol

Meaning

Do not stack
This symbol indicates that goods are sensitive to stacking

Handle with care
This symbol indicates that package must be handled with care

Team lift
This symbol indicates that two or more persons must be used for lifting as the package is

heavy

Keep Upright
This symbol indicates the goods are sensitive to tilt
Goods marked with this symbol must not be tilted. If the symbol turns red, that means goods

were tilted beyond 80

angle

Packaging

NOTE

Hazard for environment due to improper disposal

Packaging materials are valuable raw materials which can be reused in many cases or

reconditioned and recycled.



Dispose of packaging materials in an environmentally friendly way.



Follow the locally valid waste disposal regulations. If necessary, employ a special waste

disposal company to dispose of packaging materials.

The unit is packed according to the anticipated transportation conditions (such as packed in sealed

plastic or cardboard box on a transport pallet). The packaging function is to protect the unit against

damage and corrosion until installation. The packaging material should remain on the unit until just

prior to installation. Packaging includes integrated ramp.

Unpacking

Before unpacking the unit, use appropriate safety measures to make sure no person is injured in this

process. Unit may be heavy.

Follow the procedure below to unpack the unit

a) Cut the straps securing the cardboard box to the pallet.

Содержание Nextreme NRC1200 Series










































































Результаты поиска

Содержание Nextreme NRC1200 Series

Отзывы:

Похожие инструкции для Nextreme NRC1200 Series

Бренды по названию

Популярные бренды

Laird Nextreme NRC1200 Series, Руководство пользователя

Результаты поиска

Содержание Nextreme NRC1200 Series

Отзывы:

Похожие инструкции для Nextreme NRC1200 Series

Бренды по названию

Популярные бренды