Laing Innotech GmbH + Co. KG Althuette Germany Instruction LTC 11
- 24 -
Recall previously stored
memory positions
Keep the appropriate
memory key pushed until
the table stops at the
stored position
Recall memory position with 2-Button control panel without height indication
Memory position with a 2-button control panel without height indication can be
recalled when the button mode is activated.
•
To recall memory position 1, the “Up” key must be pressed twice shortly
after one another.
•
To recall memory position 2, the “Down” key must be pressed twice
shortly after one another.
Control panels with height indication
Control panels with height indication show the actual height of the table top in
centimeters or Inches depending on the configuration.
Configuration of the controller though the “LM” control panels (control
panels without height indication)
Store memory positions with “LM” control panels
•
Move the table to the desired height by use of the “up” or “down” keys
•
Press the left arrow key 4 times quickly one after another
•
Reaching the program mode will be confirmed by a sound
•
Press the right arrow key once shortly
•
Reaching the memory menu will be confirmed by one sound.
•
After the sound press the memory key the position should be saved in
•
Successful position saving will be confirmed by the number of sounds that
correspond to the selected memory key number
•
From now on height stored in the memory position can be adjusted by
pressing and holding pressed the selected memory key until the table
stops at the height stored