laguna PX12, Руководство пользователя

Страница: 15 / 38

15
The Carriage Lock must be locked when operating the planer!
2. Clean all rust protected surfaces with a commercial de-greaser. DO
NOT use acetone, gasoline, lacquer thinner or any type of cleaner that
could damage paint. Coat cleaned surfaces with WD-40® or 20W
machine oil.
3. Install dust chute using the included hardware to mount to the outfeed
side of planer. 3 screws, one on each side and one underneath the dust
chute.
Figure 4: Dust Chute
4. Attach dust collector to dust chute.
NOTE: Make sure the dust collection system has sufficient
capacity and CFM for this planer. Always turn ON the
dust collector before planning.
Table Guides
The Guides act as a stop to reduce the chance of stock from sliding
past the edge of the cutterhead or table.
Feed Speed
The feed speed is 26 FPM (feet per minute).
Dust Chute
mounting
screws (3)