12
IN ALL CASES, MAKE CERTAIN THE RECEPTACLE OR DISCONNECT IS
PROPERLY GROUNDED. IF YOU ARE NOT SURE, HAVE A QUALIFIED
ELECTRICIAN CHECK THE RECEPTACLE OR DISCONNECT.
UNPACKING
Your PX12 comes packed in a single box and possibly in a crate, before
attempting to assemble this machine, follow these directions:
1.
Remove the crate covering the machine, if so packed.
2.
Carefully cut the banding straps and remove them from the box, if so
packed.
3.
Remove the box from the crate and open box.
4.
Using the information below, ensure that all parts are present and in good
condition.
Be careful when lifting and handling the PX12! Lift PX12 from the two handles
located on each side of the machine base. Failure to comply may cause serious
injury and/or damage to the machine and/or property!
Figure 1: Lifting planer
Handles, Lifting
(2)
Содержание PX12
