laguna MJOIN8012-0130, Руководство пользователя

Страница: 16 / 34

16
Fitting the cutter guard.
Cutter guard
Allen key sprung pin
The cutter guard fits into a hole in the in-feed table. It is sprung loaded to ensure that
it will move back across the cutter after the job passes to the out feed table.
When assembling the cutter guard, ensure that the spring is tensioned and that the
pin is touching the casting as shown.
When assembled the guard should move back to cover the cutter head by the action
of the spring.
The jointer is now fully assembled but before the machine is connected to the
electrical supply the following checks and adjustments must be carried out.
1. Move the jointer to the location that it
will be used.
2. Check that the cutter head can rotate
freely and that the teeth do not contact
either the in or the out feed tables.
3. Check that the guard is covering the
cutter head and that is free to move and
spring back once released.
4. Check that all tools have been removed
from the machine.
Connecting the electrical supply.
Note.
A qualified electrician must carry out
the installation.
Ensure that the main supply corresponds
with that of the machine [Single phase 220
V].
It is recommended that you use a 30-amp
mains breaker.
Electrical cable