laguna MJOIN8012-0130, Руководство пользователя

Страница: 9 / 34

9
Parts of the jointer.
3 10 9
1 6 5 8 4 7 2
The jointer doe
’s not have many parts. The major parts are discussed in this
manual. If you are not familiar with the jointer, take the time to read this section and
become familiar with the machine.
1. Out feed Table.
2. In feed Table.
3. Fence.
4. Cutter head Guard.
5. Dust port.
6. Table height adjusting handles.
7. Body.
8. Mobility kit.
9. Start and stop switches.
10. Table clamp handles.
Out feed Table.
The function of the out feed table is to support the job once it has been machined by
the cutter head. The out feed table must be adjusted level with the cutter head teeth
at top dead centre [TDC].
In feed Table.
The in feed table is adjusted to suit the depth of cut that is required.