laguna LT14 series, Руководство пользователя

Страница: 16 / 55

16
Mobility Kit (optional)
If you have purchased a mobility kit or it is
supplied standard with your machine, now is the
ideal time to fit it, as the table has not been fitted
to the machine, and the bandsaw is lighter;
however, the mobility kit can be fitted later if you
require it.
Mobility kit assembly procedure
1. Rest the bandsaw on a 2" x 4" wood block or
something similar.
2. Fit the shaft through the base of the bandsaw.
3. Fit the wheels, washers and split pins as
shown on both sides of the base.
4. Place a wooden spacer under the machine
and then fit the front bracket as shown.
Rear axle and wheel
Front leveling bolt
Mobility front bracket
Mobility handle
Leveling Bolts
If you are fitting a mobility kit, you will only need to fit two bolts at the front of the machine. If
you decide not to fit the mobility kit or have not purchased one, then you will have to fit
Mobility kit fitted