laguna LT14 series, Руководство пользователя

Страница: 18 / 55

18
1. Remove the trunion clamp handle from the relevant bolts.
2. Position the table on the clamp bolts, taking care not to damage any of the table or
trunion surfaces.
3. While one person supports the table, the other person feeds the bolts through the trunion
slots.
4. Fit the trunion handles. Tighten the trunion clamp handles snugly. You will now fit the gas
assistor before you adjust the table handles.
5. The table can be tilted to a maximum of 45 degrees
away from the column and 15 degrees toward the
column. To assist the movement, a gas assistor is
provided. Fit the assistor to the bottom bracket with the
spindle provided and fit the spring pin. Compress the
assistor and fit the spindle and spring pin to the bracket
in the table.
6. The trunion clamp handles can now be clamped.
7. To angle the table, loosen the trunion clamp handles.
Move the table to the required angle and lock in position.
To return the table to the zero position, reverse the
procedure.
8. A 90-degree stop is provided that can be adjusted by
loosening the clamp nut and moving the bolt up or down.
The stop comes factory set, but should movement have
taken place during transport, adjust the stop so that the
table is 90 degrees to the side of the blade.
Table insert
The machine
is supplied
with a
removable
table insert
that is held in
position with a
wing nut. The
table insert is
removed when blades are removed or fitted to the machine. The insert is made of soft
aluminum so that should the blade wander and contact the insert, there is less chance of
damaging the blade. Adjusting screws are provided to adjust the insert vertically level with
the table. The insert comes factory set but should adjustment become necessary, place the
insert in the table with the wing nut in the clamped position. Place a straight edge across
the table and insert as shown, adjusting the screws so that the table insert is level with the
top of the table.
Table stop
Bandsaw shown with rack &
pinion table adjustment
Table insert wing nut