laguna LT14 series, Руководство пользователя

Страница: 19 / 55

19
Fence
The bandsaw is supplied with an
aluminum fence. Assemble the fence
to the cast-iron bracket with the bolts
and steel block provided. Adjustment
and squaring of the fence will be
covered later in the manual. Slide the
bracket onto the round steel bar
(attached to the table). The fence is used to the left of the blade, so ensure that it is on the
correct side of the table before locking in position with the ratchet handle provided.
Note : The fence can be fitted so that it can be used in high or low position (also covered
later in the manual).
Dust collection
Dust port
The bandsaw must be connected to a dust collection system or machine. As a general rule,
the stronger the extraction, the better; but 1,000 cubic feet a minute is the minimum that
should be used. The diameter of the dust collection ports on the bandsaw are 4".
Steel block Fixing screw
Fence in low position
Fence in high position