laguna CEF236230175, Руководство по установке и обслуживанию

Страница: 9 / 45

Fusion Tablesaw
9
BATTERY PACK, PICKING UP OR CARRYING THE TOOL.
Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
 REMOVE ANY ADJUSTING KEY OR WRENCH BEFORE TURNING THE POWER TOOL ON.
A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
 DO NOT OVERREACH. KEEP PROPER FOOTING AND BALANCE AT ALL TIMES.
This enables better control of the power tool in unexpected situations.
 DRESS PROPERLY. DO NOT WEAR LOOSE CLOTHING OR JEWELLERY. KEEP YOUR HAIR AND CLOTHING AWAY FROM MOVING PARTS.
Loose clothes, jewellery or long hair can be caught in moving parts.
 IF DEVICES ARE PROVIDED FOR THE CONNECTION OF DUST EXTRACTION AND COLLECTION FACILITIES, ENSURE THESE ARE CONNECTED AND
PROPERLY USED.
Use of dust collection can reduce dust-related hazards .

DO NOT LET FAMILIARITY GAINED FROM FREQUENT USE OF TOOLS ALLOW YOU TO BECOME COMPLACENT AND IGNORE TOOL SAFETY
PRINCIPLES.
A careless action can cause severe injury within a fraction of a second.
 KNOW YOUR MACHINE.
Read and understand the owner’s manual and labels affixed to the tool. Learn its application and limitations as well as the specific potential hazards peculiar
to this tool.
 USE SAFETY GOGGLES.
Some machines require additional face shielding than offered by safety goggles alone. Know your machine and the proper PPE to use.
 USE EAR PROTECTION.
Some machines operate at very high noise levels. To prevent harm, be sure to use ear protection always.
 GUARD AGAINST ELECTRIC SHOCK.
Prevent all bodily contact with grounded surfaces and parts of the machine that pose electrical threats.
 AVOID ACCIDENTAL STARTING FOR MACHINES WITHOUT MAGNETIC OR AUTOMATIC SHUT-OFF SWITCHES.
Make sure the tool is in the off position prior to plugging it in.
 KEEP GUARDS IN PLACE.
Machine parts like riving knifes, blade guard, cutter-head guards, feather boards, push sticks, etc. are designed to minimize possible injury. Keep those parts in
place unless a safer means of operation is available.

BE ALERT ALWAYS AND GIVE 100% OF YOUR ATTENTION TO THE OPERATION OF THIS TOOL.
Failure to do so can result in serious injury to both the operator and bystanders.
 DO NOT RELY ON GUARDS.
The operator of this tool is 100% responsible for his/her own safety. The guards and safety components sold with this machine are not enough to ensure safety.

CHECK FOR DAMAGED PARTS.
Before every use of this tool, makes sure the machine and any components of the machine are not damaged or at the risk of being damaged. If a damaged part
is discovered, stop immediately and put the machine out of service until the part is replaced.
warning:
All repairs should be done by trained repairmen. Contact your supplier or a competent repair service.
warning:
Use only supplier Tools or compatible and marked replacement parts. All others may cause damage or harm.
warning:
Use only manufacturer-recommended accessories. Some accessories may cause damage or harm.
Tool Use

DO NOT FORCE THE POWER TOOL. USE THE CORRECT POWER TOOL FOR YOUR APPLICATION.
The correct power tool will do the job better and safer at the rate for which it was designed.

DO NOT USE THE POWER TOOL IF THE SWITCH DOES NOT TURN IT ON AND OFF.
Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

DISCONNECT THE PLUG FROM THE POWER SOURCE AND/OR REMOVE THE BATTERY PACK, IF DETACHABLE, FROM THE POWER TOOL BEFORE
MAKING ANY ADJUSTMENTS, CHANGING ACCESSORIES, OR STORING POWER TOOLS.
Such preventive safety measures reduce the risk of starting the power tool accidentally.