laguna CEF236230175, Руководство по установке и обслуживанию

Страница: 14 / 45

Fusion Tablesaw
14
characteristics of the work room, the other sources of noise etc. i.e. the number of machines and other adjacent processes. Also the permissible exposure level can
vary from country to country. This information, however, will enable the user of the machine to make a better evaluation of the hazard and risk.”
Grounding
In the event of a malfunction, properly grounding the tool provides a path for electric charge to dissipate in a safe manner.
 AVOID BODY CONTACT WITH EARTHED OR GROUNDED SURFACES, SUCH AS PIPES, RADIATORS, RANGES AND REFRIGERATORS.
There is an increased risk of electric shock if your body is earthed or grounded.
 DO NOT MODIFY THE PLUG.
Do not remove any of the prongs attached to the proper plug for the machine.
 USE ONLY 3-WIRE EXTENSION CORDS.
Some extension cords only have two wires, which does not allow for grounding.
 ALLWAYS USE GROUNDED CONNECTIONS.
Rulings
warning:
Before connecting this tool to a power supply (receptacle, outlet, etc.) make sure that the voltage supplied is the same that is specified on the
nameplate of the tool.
Also make sure that the power supply is equipped with the appropriate breaker and plug according to your local electrical code.
IF IN DOUBT, DO NOT PLUG IN THE MACHINE. Using this tool with a voltage different than that stated on the nameplate can damage the electrical
components of this machine and any such damage will not be covered by a warranty.
warning:
Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paint.
•
Crystalline silica from bricks, cement, and other masonry products.
• Arsenic and chromium from chemically treated lumber.
Your risk of exposure varies, depending on how often you do this type of work. To reduce your exposure to these chemicals, work in a well-ventilated area and
work with approved safety equipment, such as face or dust masks that are specifically designed to filter out microscopic particles.
A notice about safety and Tool Use
The tools sold by Laguna Tools are safe when used properly, described by The American National Safety Institute, the EN Standards of safe tool use, and the IEC standards
of safe tool use. Laguna Tools is in no way responsible for injury or death that occurs while using this product. YOUR PERSONAL SAFTEY IS 100% YOUR
RESPONSIBILITY AND USING THIS PRODUCT REQUIRES 100% OF YOUR ATTENTION.
If there is any concern related to the application you are intending to use this tool for, DO NOT proceed until you have contacted the retailer you purchased it from and
have been advised on the correct application of the product.
This manual is intended to thoroughly cover the setup up, maintenance, and proper adjustments of your new purchase. Aside from the proceeding general safety
considerations, this manual DOES NOT cover woodworking or metalworking techniques that are possible with this product and the appropriate safety precautions
necessary for safe practices. There are several organizations with published safe practices, techniques, and proper operation of this tool.