Laguna Tools MPSP12-5-0135, Руководство пользователя

Страница: 9 / 66

Main Feature
1. Flip Stopper-Large stopper for accurate measurements
2. Crosscut Fence-90° and 45° quick position design for a precise crosscutting operation
3. Hold Down : Strong design with fine adjustment and floating rubber pad.
4. Saw Blade Guard : Fully adjustable blade maintains maximum protection around the saw blades.
5. Cast Iron Rip Fence : Micro adjustment for smooth and precise cutting
6. Sliding table : Double roller carriage with steel bar guidance for smoothly cutting, precise
sliding guides the workpiece through the blade.
7. Control Panel : Simple push button controls for operation
8. Blade Angle Adjusting Handwheel : Manual adjusts the angle of saw blade
9. Blade Height Adjusting Handwheel : Manual adjusts the height of saw blade
10. Cross table : Stronger table and stable to support large size panel during crosscutting operation.
11. Riving Knife : It is prevent kick back caused by the knife closing behind the blade.
Assembly and set up
(1) Control panel
1. Main Switch
：
Power on the panel saw.
2. Emergency stop button
：
Disconnects power to all motors
in the machine body.
3. Main blade on button
：
Starts the main saw blade.
4. Main blade off button
：
Stops the main saw blade.]
5.Scoring blade on button
：
Starts the scoring saw blade.
6. Scoring blade off button
：
Stops the scoring saw blade.
Fig. 1
(2) Rip fence
A. One single lock down lever
：
Simple and precise to lock the fence
assembly into fence rail
B. Micro adjust knob Precisely adjustment.
C. Forward and backward slide lock handle
：
To firm the
high/low profile alum. Fence on its forward/backward slide track
D. Micro-adjust lock knob
：
Secures the fence after it has
has been adjusted with micro-adjustment knob.
E. Rip fence scale
：
Allows precise measurement of rip cutting
operations.
Fig. 2
7
A B
C
D
E