Laguna Tools MPSP12-5-0135, Руководство пользователя

Страница: 13 / 66

(9) Cross table
Crosscut content
：
Crosscut table x 1
Crosscut table brace x 1
T-nut M8-1.25 x 2
T-nut M12-1.75 x 1
Flat washer 12mm x 1
Adjustment handle M12-1.75 x 55 x 1
Knob M8-1.25 x 25 x 2
Fig. 17
Flat washer 8mm x 2
1.Thread the M12-1.75 x 55 adjustable handle with a
12mm flat washer through the crosscut table and into a
M12-1.75 T-nut. (Fig. 17)
2. place the extension table on the pivot pin of
the swing arm and slide the T-nut into the
T-slot in the sliding table.
3. Slide two M8-1.25 T-nuts into the crosscut table brace.
4. Align the T-nuts in the crosscut table supporter with
the holes in the crosscut table and thread the
M8-1.25 x 25 knobs, with 8mm flat washers, into the
T-nuts (Fig. 20)
(10) Crosscut fence
Crosscut fence content
：
Crosscut fence x 1
Crosscut fence support plate x 1
Center stud M8-1.25 x 10 x 1
Fiber washer 8mm x 1
T-nut M8-1.25 x 2
Knob M8-1.25 x 25 x 1
Knob M8-1.25 x 1
T-bolt M8-1.25 x 60 x 1
Flat washer 8mm x 1
Lock washer 8mm x 2
Button head screw M8-1.25 x 16 x 2
1. Thread the center stud and the fiber washer into the
remaining M8-1.25 T-nut.
2. Sliding the center stud, and M8-1.125 x 60 T-bolt and
screw M8-1.25 x 25 knob into the crosscut fence (Fig. 21)
3. Slide the center stud to the end with the plastic cap and
tighten it in place.
11