Laguna Tools HW110LS-30, Руководство пользователя

Страница: 12 / 37

assembled and you read and understand the
entire User Manual.
5.4.1Remove the shipping brace:
pull the switch out of the saw cabinet and remove
the shipping brace as Fig.5
；
Fig.5: shipping brace location
5.4.2 motor cover install:
Install the door by inserting the door pins into the
hinge sockets on the cabinet as Fig.6 ;
Fig.6: motor cover install
5.4.3 handwheel handle install:
Install the handle into the Blade Tilt & Height hand
wheel as Fig.7.
Fig.7: hand wheel handle install
5.4.4 Extension wings install
(Fig.8)
A. remove the screws from the ends of the main
table;
B. inspect the extension wings and main table
mating surfaces for burrs or foreign materials that
may inhibit assembly;
C. the mating edges of the wings and the table
must be clean, smooth, and flat, use a wire brush
or file if necessary to clean up the edges, this step
will ensure that the wings mount properly to the
main table;
D. Attach the wings to the main table with the
screws removed in step A;
E. Place the straightedge across the extension
wings and main table to make sure that the table
surface is flat;
……If the outside end of extension wings tilts down
Or up, use a strip of masking tape to shim the
extension wing up Or down ;