Laguna Tools Fusion 3, Руководство пользователя

Страница: 16 / 40

Fusion Tablesaw
14
© 10/2017, Laguna Tools, Inc.
Installing/Removing Safety Accessories
A: Saw blade
B: Accessory insert block
C: Cam action lever
D: Riving knife
E: Splitter with anti-kickback pawls
F: Blade Guard
G: Adjustment Screws
H: Blade Compliant Markings
Installing/Removing the Riving knife
1. Un-plug the tablesaw!
2. Make sure the lock is in open position
3. Insert the riving knife
4. Position the riving knife to left side of case
5. Lock the riving knife
6. Reinstall throat plate
CAUTION: Make sure the riving knife is in-
line with the blade. If it is not in line, please
see the Adjustments Section.
WARNING: MAKE SURE SAW IS UNPLUGGED.
With the saw unplugged, throat plate removed,
and the cam lock mechanism in the open position
(pulled up), insert the riving knife into the slot.
Position the riving knife against the left inside of
the casing and push down. Make sure the knife is
positioned correctly and seated in the bottom of
the casing. Keep right hand free for next step.
Keep firm hold of the riving knife with left hand and
engage the cam lock with the thumb of your right
hand.
CAUTION: Make sure the riving knife is in-line with
the blade. If it is not in line, please see the
Adjustments Section.
Use Caution:
Make sure to inspect the
riving knife frequently. Do not operate
with a bent or nicked riving knife.
Only use the riving knife with
sawblades that satisfy blade compliant
markings on the side of the knife.
A
B
C
D
E
F
G
H
3. insert THE RIVING KNIFE 4. position TO LEFT OF CASING
5. lock THE RIVING KNIFE