Dake Corporation
1809 Industrial Park Dr
Grand Haven, MI 49417
983107-1
8
REV122021
GENERAL SAFETY REGULATIONS
When using electrical tools, it is essential to observe basic safety precautions at all times to
reduce risk of fire, electric shock, and injury.
Ambient Conditions:
•
Avoid using the machine in locations which are very humid or in the presence of
flammable liquids or gas.
•
Always keep the work area tidy and clear of work scarp pieces; untidy work benches and
work areas are a source of potential danger.
Clothing and personal protective equipment:
•
Do not wear clothing with loose sleeves or any accessories such as scarves, necklaces,
bracelets or any other object which may get caught up in the machine’s moving parts.
•
Always wear safety protection devices. regulation safety glasses/goggles, well-fitting
gloves, ear protection.
•
It is advisable to wear slip-resistant safety footwear.
•
When necessary, suitably tie back long hair to prevent any risk of it becoming trapped or
entangled in moving parts.
•
Wear an approved dust mask.
Care and use of electrical components:
•
Pay attention to the power supply cable: never use it to lift the machine. Do not pull on
the cable to disconnect the plug from the power socket. Keep the cable away from sharp
edges, oil and high temperatures.
•
Should it be necessary to use an extension cord, make sure it is heavy enough and an
approved type.
•
Regularly check any extension cords being used and replace them if damaged.
•
Whenever the machine is used outdoors, only use extension cords which have been
approved for outdoor use and are marked accordingly.
General safety warnings:
•
Keep unauthorized persons and children away from the machine: never allow them to
come near or into contact with it.
•
Always pay attention what you are doing.
•
Always stay in a comfortable and well-balanced position.
•
Never leave tools or measuring devices on the machine.
•
Adopt safe working methods.
•
Unplug the machine from the power supply when it is not in use, before performing any
maintenance operations and before replacing accessories or blades.
