Dake Corporation
1809 Industrial Park Dr
Grand Haven, MI 49417
983107-1
14
REV122021
POSITIONING OF THE WORKPIECE IN THE VISE
TO POSITION FLAT OR SPECIAL
SHAPED PROFILES, PLEASE REFER
TO THE EXAMPLES PROVIDED IN
THE DRAWING.
INSTALLATION AND ADJUSTMENT OF BANDSAW STOCK STOP
1. Screw the guide rod (10) in the hole on the base.
2. Tighten the nut.
3. Loosen the handwheel and position the holder (10) at the required distance.
4. Tighten the handwheel.
OPERATIONS
THE MACHINE IS EQUIPPED WITH A MAIN POWER SWITCH (located on control box 8)
TO BE ACTIVATED BEFORE THE WORK OPERATION. ONCE WORK HAS BEEN
COMPLETED, TURN OFF THE MAIN POWER SWITCH.
• Never wear gloves while operating saw.
• Before making a new cut, always remove the cut part left from the previous cut.
• Keep hands well away from the cutting area.
