Laguna Tools 1632, Руководство по эксплуатации

Страница: 13 / 18

-13- www.igmtools.com
TROUBLESHOOTING GUIDE: MACHINE
Problem Possible Cause Solution
Drum height adjustment works improperly
Improper adjustment of height control Readjust height control
Knocking sound while running Bearing worn
Replace the bearing.
Contact distributor
Sniping of wood (gouging near end of
board)
Inadequate support of stock Use roller stands to support stock
Conveyor drive or driven rollers higher than
conveyor bed
Readjust rollers
Exessive tension roller pressure Adjust rollers
Burning of wood or melting of finish
Feed rate too slow Increase feed rate
Excessive depth of cut Reduce depth of cut
Conveyor motor stalls
Conveyor belt is too loose Adjust belt tension
Excessive depth of cut Reduce depth of cut
Wood slipping on conveyor due to lack of
contact
Use alternate feeding procedure