Dismantling:
*
Unscrew the glass bowl's tightening ring by turning it anti-clockwise
(bowl turned upside down) and remove the
6
-blade assembly and
the seal so they can be cleaned.
*
Once the glass bowl has been cleaned, place the bowl upside down
and replace the blade and seal assembly. Refit the tightening ring
and screw clockwise until tight.
Tip: For a pre-cleaning or fast cleaning between
2
preparations,
put about
1
liter of hot water in the bowl and run the blender for
30
seconds on intermediate speed.
53
ENG
