START-UP AND USE
1
ST
USE
*
When you unwrap your unit, carefully remove all of the securing
elements and bags and labels from the packaging.
*
Make sure that all of the parts and accessories are present and intact.
*
Fully unwind the cable and carefully examine it before use.
*
Before using your unit, thoroughly clean all of the parts in water
with soap or dishwashing liquid added.
*
Rinse and carefully dry all of the parts.
See upkeep section.
ASSEMBLY
*
Flip your glass bowl upside down.
*
Place the silicone seal around the blade assembly.
*
Place the blade and seal assembly in the glass bowl.
*
Position the tightening ring, screw clockwise and tighten.
*
Position the glass bowl on the base and turn it clockwise until
you hear a "click" fixing it in place, tighten further if necessary.
*
Plug in the power cord.
“click!“
1
2
3
4
49
ENG
