Lagoon 620, Руководство пользователя, Страница: 99 / 120

„
8.1 Engines
z
ACCESS
You have access to the engines through the transom extension
hatches.
z STARTING
Before starting the engines :
- Check the fuel valves are open (see place following version page 14).
- Open the valves of the engine cooling systems.
- Switch on the electric system turning their engine cutouts to ON
(access in the engine bilges).
- Sweep the e-key in front of the engine starting panel at the port
helm station. The warning lights on the panel and controls turn green.
- Start the port or starboard engines pressing the “START/STOP”
button on the starting panel.
Please note: When “IGNITION” is 'on', it means the ignition was
switched on.
To shift from the port to the starboard helm station, change the port
station controls to neutral position, then shift to the starboard station
and press the “STATION” button under the controls.
It is possible to lock the helm station you wish , keeping the
“STATION” button pressed.
Carefully read the engine instruction guide supplied with the boat ; it
gives you detailed explanations as to the best use of the engines and
relative operations.
z
ENGINE START WITH BATTERY COUPLING
In case one of the start battteries is not available :
- Turn to the ON position the coupling cutout (port engine bilge).
- Start the engine concerned.
- Turn the coupling cutout back to the OFF position.
Nota: in the standard configuration, the engine batteries are
recharged by their respective engines.
z MAINTENANCE OF THE ENGINES
Follow the instructions for maintenance appearing in the guide
supplied with the engines.
z ENGINE WATER SUCTION VALVES
The engine water suction valves (access in the engine bilges) shall
absolutely be open before starting the engine.
Keep the strainers of both engine in the best possible state of
cleanliness.
Brush the stainers when the boat is carenned.
PROPULSION
PROPULSION
8
LAGOON 62O
97
RECOMMENDATION
Stop the engine before opening the hatches.
In case you have to intervene when the engine is
running :
- Stay away from belts and mobile parts.
- Be careful with full clothes, long hair, rings, etc..
(they may be caught).
- Wear appropriate clothes (gloves, caps, etc.).
RECOMMENDATION
At anchor, lock the start of the engines using the
e-key.