Lagoon 52 F, Руководство пользователя

Страница: 89 / 144

ELECTRICITY
87
7
ELECTRICITY
- Select this supply source at the chart table multifunction touch
screen.
- Push the automatic breaker of the appliance to be used (washing
machine, watermaker, etc.) on the electrical panel.
Once these operations have been carried out, switch on the appliance
using its own controls.
TO STOP THE 110 V - 220 V POWERED APPLIANCES
To stop the 110 V - 220 V powered appliances (washing machine,
watermaker, etc.) it is advisable to do as follows:
- Stop the appliance with its own controls.
To stop 110 V - 220 V appliances using the generator, wait for 10 to 15
seconds between the stop of each new component (in order to allow
the generator to become stabilized).
- On the electrical panel, turn off the automatic breaker of the ap-
pliance that is used.
- At the multifunction touch screen, turn OFF the 110 V - 220 V supply
(generator or shore power socket).
- Stop the generator or disconnect the shore power socket.
z
CHECKING OF THE 110 V - 220 V CONSUMING APPLIANCES
MANAGEMENT OF 110 V - 220 V SUPPLY
The chart table multifunction touch screen enables you to choose the
power supply source (shore power socket, generator or inverter) for
the different 110 V - 220 V appliances on board.
110 V - 220 V PROTECTION PANELS
The starboard passageway electrical cabinet groups 2 automatic
breaker busbars for 110 V - 220 V appliances and equipment:
The upper line concerns the HIGH LOAD busbar (220 V - 50 or
60 Hz).
The lower line concerns the COMFORT busbar (220 V - 50 Hz or 110 V
- 60 Hz).
The automatic breakers for the air conditioning units are located in the
port engine room.
Nota: all the automatic breakers of the 110 V - 220 V circuit are bi-
polar automatic breakers.
z
USE OF THE 110 V - 220 V POWERED APPLIANCES
TO SWITCH ON THE APPLIANCES
In order to be able to use the 110 V - 220 V powered appliances
(washing machine, watermaker, etc.), it is advisable:
- Ensure that the automatic breakers are OFF on the corresponding
110 V - 220 V protection panel.
- Switch on the 110 V - 220 V source (start the generator or connect a
shore power socket to shore).
LAGOON 52 F
WARNING
Before you turn the 110 V - 220 V source selector to
OFF, make sure no other appliance is working (danger
of an electric arc that would destroy the changeover
switch and risk of damaging the generator).