Explanation of the operating elements
Operation
2
General information
Safety information
Power connection regulations
Please note the connection conditions specified by your
local electrical power supply utility and the VDE
regulations.
Your heating control system may be installed and serviced
only by appropriately authorised specialists.
E
If the system is not installed properly, there is a risk of
fatal or severe personal injury.
Warranty conditions
If the system is not installed, commissioned, serviced and
repaired professionally, this will render the manufacturer's
warranty null and void.
Important text passages
!
Important information is highlighted with an
exclamation mark.
E
This attention symbol is used to point out dangers in
this manual.
Installation
Information on installation of the system is provided in Part
2 of this manual together with a connection diagram.
Description
Declaration of conformity
This device corresponds to the requirements of the
relevant guidelines and standards provided the
corresponding installation regulations and the
manufacturer’s instructions are complied with.
General Function
•
Heating module in a cascade
•
Control of return flow temperature increase using
pump or mixer (depending on configuration)
•
Control of a modulating heat generator by means of
driving the air damper (function only in connection with
a Manager)
