Lagler HUMMEL, Руководство по эксплуатации

Страница: 35 / 88

HUMMEL
®
01.01.2019
English / Englisch
Fig. 57 When inserting the guide tube, make sure that
the upper rod of the lowering mechanism feeds
in correctly!
Fig. 58 After inserting the guide tube, carefully tighten
the wing screw at the lower rod.
Fig. 59 After inserting the guide tube, carefully tighten
the wing nut at the machine housing. Fig. 60 Lift the sanding drum off the floor by turning the
lowering lever at the handle upwards.
6.2 ASSEMBLY AFTER TRANSPORTATION
When assembling the HUMMEL
®
after transport, adhere to the
following sequence of work steps:
1 Press the lowering lever at the handle downwards (fig. 57, 1).
2 Insert the guide tube into the opening in the machine housing
and at the same time insert the upper rod into the lower rod
(fig. 57, 2).
3 Carefully tighten the wing screw at the lower rod (fig. 58)
and the wing nut at the machine housing (fig. 59).
4 Lift the sanding drum off the floor by turning the lowering
lever at the handle upwards (fig. 60).
5 Place the motor in the motor bearing bracket (fig. 61) and
tighten the two motor nuts slightly (fig. 62).
TRANSPORT AND STORAGE
Fig. 61 Place the motor in the motor bearing bracket. Fig. 62 Tighten the two motor nuts.
6
35