Lagler HUMMEL, Руководство по эксплуатации

Страница: 52 / 88

HUMMEL
®
01.01.2019
English / Englisch
7.9 REPLACEMENT OF LATERAL WHEELS
Use exclusively original LÄGLER
®
lateral wheels (part number in
Section 11, Spare parts HUMMEL
®
)!
ATTENTION!
For a good sanding result the lateral wheels must always be
exchanged in pairs!
1 Lift the sanding drum off the floor by turning the lowering
lever at the handle upwards (fig. 94).
2 Switch off the machine and pull the power plug out of the
socket!
3 Tilt the machine backwards over the safety guards (fig. 99).
Ensure that the machine is standing securely!
4 Release the screw in the center of the wheel and remove
the screw and washers (fig. 100). Before removing the left
lateral wheel open the belt guard (fig. 101).
5 Pull the wheel off the wheel lever.
6 Push the new wheel onto the wheel lever.
7 Mount the washers and the screw.
8 Tighten the screw again.
9 Close the belt guard (fig. 102).
NOTE:
As it is so easy and quick to exchange the lateral wheels and
the back wheel, it is advisable to use a second set of wheels
when performing rough work.
MAINTENANCE WORK AND REPLACEMENT OF WEARING PARTS
7
Fig. 100 Remove the screw and washers in the center of
the wheel and remove the lateral wheel. Assemble
the new wheel in reverse sequence.
Fig. 99 Pull the power plug out of the socket! Tilt the
machine backwards. Ensure that the machine is
standing securely!
Fig. 102 Close the belt guard.
Fig. 101 Pull the power plug out of the socket and open
the belt guard.
52