Lagler HUMMEL, Руководство по эксплуатации

Страница: 32 / 88

HUMMEL
®
01.01.2019
English / Englisch
TRANSPORT AND STORAGE
6.1 DISMANTLING THE MACHINE BEFORE
TRANSPORTATION
For transportation, the machine can be dismantled into three parts:
Guide tube, motor and machine housing. During manual transport
over roads and pavements, to protect the wheels and sanding
drum, use the TransCart (part number in Section 11, Spare parts
HUMMEL
®
).
1 Lift the sanding drum off the floor by turning the lowering
lever at the handle upwards (fig. 46).
2 Switch off the machine and pull the power plug out of the
socket!
3 Empty the dust bag ( Section 5.4, Emptying the dust bag ).
4 Loosen the two motor nuts at the motor bearing bracket
(fig. 47).
The motor nut must only be backed out from the fitting
between the motor nut and motor bearing bracket, and not
completely removed (fig. 48).
5 Open the belt guard (fig. 49).
6 Release the tension of the V-belts by turning the eye bolt at
the motor counterclockwise (fig. 50).
CAUTION!
RISK OF INJURY:
During dismantling and mounting the V-belts, take care of
your fingers
danger of crushing!
Fig. 46 Lift the sanding drum off the floor by turning the
lowering lever at the handle upwards.
Fig. 47 Loosen the two motor nuts.
Fig. 48 Turn the two motor nuts out so far (1) until the two
nuts used to fit into the motor bearing bracket are
exposed (2).
Fig. 49 Pull the power plug out of the socket and open
the belt guard.
Fig. 50 Release the tension of the V-belts by turning the
eye bolt at the motor counterclockwise.
6
32