Lagler HUMMEL, Руководство по эксплуатации

Страница: 50 / 88

HUMMEL
®
01.01.2019
English / Englisch
MAINTENANCE WORK AND REPLACEMENT OF WEARING PARTS
7.8 REPLACEMENT OF REAR WHEEL
Use exclusively original LÄGLER
®
rear wheels (part number in
Section 11, Spare parts HUMMEL
®
)!
7.8.1 REPLACEMENT OF REAR WHEEL ONLY
1 Lift the sanding drum off the floor by turning the lowering
lever at the handle upwards (fig. 94).
2 Switch off the machine and pull the power plug out of the
socket!
3 Tilt the machine forward over the bracket (fig. 95). Ensure
that the machine is standing securely (fig. 96)!
4 Release the screw in the center of the wheel and remove
the screw, washers and nut (fig. 97). Ensure that you do not
lose the nut.
5 Pull the back wheel off the tail axle housing.
6 Push the new back wheel onto the tail axle housing.
7 Insert the nut in the hexagonal recess of the tail housing and
hold onto the nut. Mount the washers and the screw.
7
Fig. 94 Lift the sanding drum off the floor by turning the
lowering lever at the handle upwards
Fig. 95 Pull the power plug out of the socket! Tilt the
machine forward over the bracket.
Fig. 96 Ensure that the machine is standing securely! Fig. 97 Remove the screw with the washers and nut in the
center of the wheel and take off the back wheel.
Assemble in reverse sequence.
50