Lagler HUMMEL, Руководство по эксплуатации

Страница: 62 / 88

HUMMEL
®
01.01.2019
English / Englisch
CAUSES OF FAULTS
9.4 THE MACHINE VIBRATES INTENSELY AND
RUNS NOISILY
• The sanding medium does not have the proper tension. The
tension must be corrected.
Section 5.3, Changing the sanding belt
• The sanding medium is damaged or incorrect and must be
replaced.
S ection 5.3, Changing the sanding belt
• The sanding belt tracking is incorrect and must be adjusted.
S ection 7.3, Checking and setting the sanding belt
tracking
• The sanding drum is dirty or damaged and must be replaced.
Section 7.6, Replacement of sanding drum
• The tensioning roller of the drive unit is dirty, damaged or
worn-out and must be replaced.
Section 7.7, Replacement of tensioning roller
• A V-belt is dirty, damaged or worn-out and must be replaced.
Section 7.10, Replacement and tensioning of V-belts
• A pulley is dirty, damaged or worn-out and must be cleaned
or replaced.
• There are clogged materials and deposits in the machine
that must be removed.
9.5 THE MACHINE RUNS BUT CREATES A GREAT
DEAL OF DUST
• The dust bag is more than one third full and must be emptied.
Section 5.4, Emptying the dust bag
• The dust bag is not correctly attached or is damaged and
must be replaced.
Section 4.1, Preparing the machine for operation
• The sealing felt at the machine housing is damaged and must
be replaced.
Section 7.5, Checking the dust pick-up
• There are clogged materials and deposits in the machine
that must be removed.
• The suction V-belt is not tight enough and must be tightened
or damaged and must be replaced.
Section 7.10, Replacement and tensioning of V-belts
• The side cover is not mounted at the machine and must be
mounted ( fig. 20).
9
62