manualshive.com logo in svg

Lagler Flip, Руководство по эксплуатации, Страница: 29 / 64

Поделиться
Скачать
Lagler Flip Скачать руководство пользователя страница 29

FLIP

®

  01.01.2019

English / Englisch

7.1   CLEANING AND CARE

  WARNING!

RISK OF FIRE from the formation of sparks while sanding or 

from spontaneous combustion:

• 

  There is a high risk of fire when sanding woods with a 

large amount of resin, oiled or waxed floors or metal!

 

Therefore, the machine must always be cleaned carefully 
directly after sanding!

•

   Be certain to note the warning notices of the paint, oil 

and wax manufacturers!

RISK OF PROPERTY DAMAGE:

•   Never use any cleaning products which contain solvents!

The following maintenance measures should be conducted before 

beginning work to ensure the proper functionality of the machine 

and the usual first-class sanding results.

• 

Clean the wheels of the machine.

• 

Check the tension of the V-belt and correct this if necessary 

(

 

Section 7.2, Tightening the V-belt

).

• 

Clean the paper tensioning screw and the thread of the 

sanding plate regularly. Otherwise the thread will be 

damaged.

• 

Check the dust suction system and the dust bag for leaks 

and damages.

• 

Conduct a visual inspection of the electrical equipment 

(rocker switch, extension cable, plug, couplers).

Following restoration tasks, residual material consisting of 

adhesive, wax or sealing lacquer may have accumulated in the 

pulleys or in the attachment.

This can impair the running characteristics of the machine and 

reduce the suction performance. This kind of soiling is indicated 

in most cases by unsteady running, difficult starting, reduced 

working speed and increased development of noise. The suction 

performance also decreases. In this case, the V-belt must 

be removed (

 Section 7.3.1, Removing the V-belt

) and the 

attachment and flanks of the pulley must be cleaned. Check whether 

there are any deposits in the fan housing or on the fan blades and 

remove these if necessary. Wear a respiratory protective mask.

MAINTENANCE WORK AND REPLACEMENT OF WEARING PARTS

7

29

Содержание Flip

































































Отзывы:

Нет отзывов