manualshive.com logo in svg

Lagler Flip, Руководство по эксплуатации, Страница: 22 / 64

Поделиться
Скачать
Lagler Flip Скачать руководство пользователя страница 22

FLIP

®

  01.01.2019

English / Englisch

5.2   REPLACING THE SANDING MEDIUM

ATTENTION!

•   Only use sanding discs with paper as the base! Do not use 

any sanding discs with thick bases such as fiber discs, 
cutting discs or similar materials! Otherwise the sanding 
plate will be damaged!

•  

Do not use any double sanding discs (with sanding grit on 
both sides)! Otherwise the Velcro coating on the sanding 
plate will be damaged!

•  

Always use only one sanding disc! Otherwise the sanding 
result will not be satisfactory and the dust suction system 
will not be fully operational!

•  

You will receive the best sanding finish and price/
performance ratio with the Velcro sanding discs from 
LÄGLER

®

!

Depending on the material being sanded, you will use various 

sandpaper grit grades. Proceed as follows to change the sanding 

medium:

5.2.1   VELCRO SANDING DISCS

1

 

Switch off the machine and pull the power plug out of the 
socket!

2

 

Lay the machine on its side, avoiding damage to the floor 

and the machine! 

3

 

Pull the worn-out Velcro sanding disc off of the sanding plate 

(fig. 14).

4

 

Place a new Velcro sanding disc on the sanding plate. The 

Velcro sanding disc must be positioned in the center of the 

sanding plate. The hole in the center of the sanding disc and 

the universal spanner make this step easier (fig. 15).

5

 

Press the Velcro sanding disc onto the sanding plate.

WORKING WITH THE FLIP

®

5

Fig. 14 

Remove the Velcro sanding disc from the sanding 
plate.

Fig. 15 

Mount the new Velcro sanding disc in a centered 
position and press down.

22

Содержание Flip

































































Отзывы:

Нет отзывов