Lafayette Tenera Auto-Lift, Руководство по установке

Страница: 36 / 76

Tenera Installation Instructions 36
BACK
Install the Shading
■
Position the shading so that the
front faces you.
■
Slide the headrail into the
installation brackets so the edge
of the headrail is between the
lever and the bracket, as shown.
■
Firmly push the headrail into each bracket until it
clicks and the lever snaps to the right side of the bracket.
IMPORTANT:
Carefully pull on the headrail at each bracket to ensure it is installed securely.
Attach the Universal Cord Tensioner (UCT)
Before you proceed, you
must
first slide the cord tensioner
to the bottom of the cord loop.
■
Insert a small screwdriver, punch, or awl through the
screw hole at the bottom of the cord tensioner.
■
Move the screw hole down to the indicator line to
release the safety mechanism.
■
Slide the cord tensioner down to the bottom of the
cord loop.
■
Attach the cord tensioner(s) according to the instructions
provided with the
Universal Cord Tensioner Installation Kit.
WARNING: It is imperative that the cord tensioner be properly secured to
the wall or window frame to reduce children’s access to the cord loop.
Young children can strangle in cord loops. They can also wrap cords around
their necks and strangle.
CAUTION: The shading will not operate properly unless the cord tensioner is
secured. A cord tensioner installation kit has been included with your shading.
Follow the instructions in the kit to correctly secure the cord tensioner.
Headrail
Installation
Bracket
Lever
Slide the Headrail
between the Lever
and the Bracket.
Headrail
de the Headrail
ween the Lever
nd the Bracket.
Screw
Hole
Indicator
Line