Lafayette Tenera Auto-Lift, Руководство по установке

Страница: 53 / 76

Tenera Installation Instructions 53 BACK
1. Mark this location on the window casement.
Mount the Support Clip
3. Mount the support clip on the mark using one screw.
Adjust the position so the flat front of the support clip
(behind the slider portion) aligns with the front fabric panel.
4. Raise the slider on the end of the support clip and place
the fabric edge into the opening on the end of the clip.
Adjust the Fabric
5. Insert a tool, such as a small screwdriver or bent paperclip,
through the slot in the clip. Use it to adjust the position of
the fabric edge until the wrinkle disappears.
CAUTION:
Use care not to snag the fabric.
6. While still holding the fabric in position with the tool,
lower the slider to lock the fabric in place.
➤
If you still see a wrinkle in this location, lift up the slider,
insert the tool through the front slot to release the fabric
from the teeth, then re-adjust the fabric.
➤
If you see a wrinkle in another place, install another
support clip.
Mark
Location
Mount
Clip
Insert
Fabric
Adjust
Fabric
Lock
Slider