Lafayette Tenera Auto-Lift, Руководство по установке

Страница: 12 / 76

Tenera Installation Instructions 12
BACK
STEP 2 — Install the Shading
CAUTION:
Take care when handling the antenna wire
attached to the motor cartridge. Do not cut or remove
this antenna.
■
If you have an external eye, plug it into the 3-pin port
on the back of the shading. Be sure the plug is oriented
correctly.
Do not force
the connection.
■
Position the shading so that the front
(colored fabric) faces you.
■
Slide the headrail into the installation
brackets so the edge of the headrail
is between the lever and the bracket,
as shown.
■
Firmly push the headrail into each bracket until it clicks
and the lever snaps to the right side of the bracket.
IMPORTANT:
Carefully pull on the headrail at each bracket to ensure it is installed securely.
Enhance the Antenna Reception
■
Carefully unsnap the antenna from its storage position on the motor cartridge and form it to
hang straight down from the shading. This helps increase the signal range for the remote.
3-Pin Port
Antenna
Back
of Shading
Headrail
Installation
Bracket
Lever
Slide the Headrail
between the Lever
and the Bracket.
Headrail
de the Headrail
tween the Lever
nd the Bracket.