LaCimbali Q10, Использование и установка

Страница: 59 / 244

Connecting the Machine – Modulo Q10 Milk + Cup
Please follow these steps to connect the MODULO Q10 MILK
+ CUP
to the machine
1) insert the milk intake tube (
40
), from the machine, in
the manifold (
C ) positioned in the specific hole of the
MODULO Q10 MILK + CUP ;
2) Place the module next to the machine as shown in the
figure. Make sure the manifold ( C
) is inserted in the side
hole of the machine
;
3) Insert the intake tube (
40 ) into the milk container;
4) Insert the milk container in the MODULO Q10 MILK +
CUP
and close the door.
hen placing the
MODULO Q10 MILK + CUP
next
to the machine, make sure the control panel can be
opened.
The correct position is show below
1
2 3
4
40
40
C
Connecting the machine to a generic fridge module
Besides being able to connect the machine to the
MODULO
Q10 MILK + CUP
, it can also be used with a generic milk
cooler.
The position of the generic milk cooler is different from the
position of the
MODULO Q10 MILK + CUP
. For example, the
illustration here shows how to connect the machine to the milk
cooler positioned underneath the machine counter.
Note In this case, the milk intake tube (
40
) comes from the
machine base and not from the side as with the
MODULO
Q10 MILK + CUP
.
The installer connects the milk tube.
40
57
English