LaCimbali Q10, Использование и установка

Страница: 73 / 244

BEFORE YOU START
Coffee
circuit
Keep the coffee circuit wash key (
• 26
) pressed for a few seconds.
Hot water
Continuously dispense hot water
•
until at least 0.5 liters of water have been dispensed.
Stea (where present)
Dispense steam from the nozzles for about a minute, using the appropriate buttons. •
Milk circuit
Keep the milk circuit washing key (
• 28
) pressed for a few seconds and follow the instructions indicated on the display (for
more information, please consult the “Cleaning and Maintenance” chapter).
Solu les circuit (only for machines with solubles)
Keep the coffee circuit washing (
• 26
) and milk circuit washing (
28
) keys pressed for a few seconds (for more information,
please consult the “Cleaning and Maintenance” chapter).
ON THE JOB
Coffee / Cappuccino / Milk dispensing
If the machine has remained inactive for more than an hour, before dispensing a beverage, perform a wash cycle following
•
the instructions in this manual (see “Cleaning” paragraph).
Hot water dispensing
If the machine has remained inactive for more than an hour, before dispensing hot water for consumption, dispense hot water
•
for 2-3 seconds and discard.
Steam dispensing
(where present)
Before heating the beverage (water, milk, etc.), open the steam nozzle for at least 3 seconds and let the steam escape so
•
that the condensation is eliminated.
Milk circuit and coffee circuit cleaning cycles
solu les circuit
(only for machines with solubles)
Please read the specific section in the user’s manual to learn how to clean these circuits. •
10. Rules for the worker operating the machine
WARNING BEFORE OU START OPERATING THE MACHINE, ASH THE INTERNAL COMPONENTS
FOLLO ING THE INSTRUCTIONS INDICATED BELO .
THESE STEPS MUST BE REPEATED AT LEAST ONCE A DA AND HEN THE MACHINE HAS NOT BEEN
OPERATED FOR MORE THAN 8 HOURS.
71
English