LaCie Ethernet Disk mini
User Manual
Fig. ..A.
5.4. Network Menu
On this page you can view information about the
LaCie Ethernet Disk mini’s IP configuration. From this
page, you can also modify the IP configuration of the
LaCie Ethernet Disk mini (Fig. 5.4.A.).
On this page, the connected interface will be repre-
sented by a blue button, and the disconnected interface
by a red button. Only settings for connected interfaces
can be modified.
Using the NAS Administration Page
page
On this page, you can check which interface is
connected, either the Ethernet, or USB or both and
then to configure the connection.
There are two alternative methods for determining
the LaCie Ethernet Disk mini’s IP address: Obtain
Configuration From DHCP Server or Configure
Manually (Fig. 5.4.1.A.).
Obtain Configuration From DHCP Server
This method is used when the LaCie Ethernet Disk
mini is connected to a DHCP enabled network with a
DHCP server. In this case, the server automatically as-
signs the IP address for the LaCie Ethernet Disk mini.
Configure Manually
This method is used when the LaCie Ethernet Disk
mini is connected to a non-DHCP enabled network.
In this case, you will need to manually assign the cor-
rect network settings for your LaCie Ethernet Disk mini.
Please refer to your network administrator for more in-
formation about your network and which parameters you
should use. For more information, refer to chapter 3.6.,
Configure Your Drive On a Local Area Network with no
DHCP Server
.
5.4.1. IP Configuration
■
Fig. ...B.
TEChNICAl NOTE:
If you have a small home
network with a router, the Gateway and DNS
Server address will be the local IP address of your
router.
