ELECTRICAL CONNECTIONS
Prima OPH
Prima OPH
Fig. 8
Fig. 10
A
2
1
3
Fig. 9
B
6135000-795
PRIMA OPH
18
Issue 1.6
Printed on: July, 2020
CONTROLS
Connect the power cable to the AC inlet socket
(2) provided on the back of the swivel arm as
shown in the fig-8.
Switch on the power from on/off switch (2).
Note: Power supply is designed with universal
input 100V-240V AC, 50/60Hz. To plug in follow
instruction on electrical label provided at
bottom of the arm as shown (3) here in fig-8.
ON/OFF switch (shown as 2 in fig-8 above)
It is located on the back of the swivel arm. At
‘ON’ position, green LED glows and cooling fan
starts running. Keep the intensity control knob at
Minimum level before switching on the system.
To save burning life of LED, either switch OFF the
microscope or raise the suspension arm in pack posi-
tion when not in use.
INTENSITY CONTROL KNOB
It is located in front of the suspension arm shown
as (A) in fig-9. Brightness of field of view can be
adjusted as per user comfort using intensity
control knob.
SWIVEL ARM LOCKING KNOB
This knob helps you to lock the movement of
Swivel arm at the desired position after initial
focusing of the attendance area by turning it
clockwise, knob is shown as (B) in fig-9.
BRAKES
Locks the stand from unwanted movement by
pressing down the two brakes provided on caster
wheels. To unlock press uper portion of brake.
see figure-10.
