Prima OPH
6
6135000-795
PRIMA OPH
Issue 1.6
Printed on: July, 2020
SPECIAL INSTRUCTIONS FOR INSTALLATION & USE
REQUIREMENT FOR OPERATION
Installation of the instrument must only be carried out by an authorized LABOMED agent or
Representative. Please make sure that the following requirements for operation remain fulfilled
in the future:
- All mechanical connections (details in the user’s manual) which are relevant to safety
and properly connected and screw connections tightened.
- All cables and plugs are in good working condition.
- The voltage setting on the instruments conforms to the rated voltage of the line Supply on
site.
- The power cord being used is the one designed for use with this instrument.
BEFORE EVERY USE AFTER RE-EQUIPPING THE INSTRUMENT
•
Make sure that all “Requirement for operation” are fulfilled.
•
Go through the checklist.
•
Re-attach or close any covers, panels or caps which have been removed or opened.
•
Pay special attention to warning symbols on the instrument (triangular warning signs
with exclamation marks), labels.
FOR EVERY USE OF THE INSTRUMENT
•
Avoid looking directly into the light source, e.g. into the microscope objective lens or a
light guide.
•
All light radiation have an effect in skin and biological tissues. For your own protection
advised to keep the light level to the absolute minimum required for your procedure.
WARNING!
Only the right configuration of LABOMED Prima surgical microscope must be used for
Related procedure.
