Labom GV4610 Series, Руководство по эксплуатации

Страница: 16 / 20

BA_084_2019-05_10.00 Temperature transmitter clamp-on Page 16/20
6.4.4 "Display" menue
In the "Display" menue, you find all the settings that affect the display on the screen.
Menue entry Description
Language Select menue language
Units Setting units for the different measured and displayed values
Screen mode Configuration of the screen layout and content (see 6.2.4)
Decimal point Select setting of decimal places of the 1st value by specifying the
decimal point
Backlight Switch backlight on/off
Table 9: "Display" menue
6.4.4.1 Submenue "Units"
You can select the unit of every value shown on the display. These settings do not affect
the internal calculations of the device or HART communication.
The shown conversions are only meant for your orientation. The device uses conversion
values with ten decimal places.
Temperature unit
The unit in which the temperature is to be shown can be selected from the following list:
Unit Description
°C Degree Celsius
°F Degree Fahrenheit ( T
Fahrenheit
= T
Celsius
*1,8 + 32 )
°R Degree Rankine ( T
Rankine
= T
Kelvin
*1,8 )
K Kelvin ( T
Kelvin
= T
Celsius
+ 273,15 )
Table 10: Possible units for temperature
6.4.4.2 Submenue "Screen mode"
In the "Screen mode" submenue, you configure the representation of the measured values
and additional information on the display.
With the menue item “Screen layout” you configure the information that is displayed and its
layout. Up to four values can be displayed at the same time. In the additional menue en-
tries "1st value" to "4th value" you define the contents of the placeholders in the layout.
The various layouts as well as the possible content of the values are described in Chapter
6.2.4.