BA_084_2019-05_10.00 Temperature transmitter clamp-on
Page 14/20
6.4.1
Main menue
The main menue has the following entries:
Menue entry
Description
Quick setup
Selection of the most important settings
Adjustment
Adjustment functions for temperature measurement and current
output
Display
Functions for configuring the display
Measurem./Output
Configuration of the temperature measurement and current out-
put
Diagnosis
Diagnostic information such as min/max values
Simulation
Simulation of temperature and current for function check of the
measurement chain
Communication
Information and settings regarding HART communication
System
Device data and function such as factory reset
Tabelle 6: The main menue
6.4.2
"Quick Setup" menue
In Quick Setup, basic configuration options are combined to make it possible to quickly
configure key functions. All functions of the quick setup can also be found at another posi-
tion in the menue tree.
The following functions are available in the Quick Setup menue:
Menue entry
Description
Language
Select menue language
Temperature unit
Select unit for temperature (see 6.4.4.1)
Lower range val.
Setting of the temperature value that should correspond to 4 mA
(start of range) (see 6.4.5.2)
Upper range val.
Setting of the temperature value that should correspond to 20 mA
(end of range) (see 6.4.5.2)
Device ID
Setting the device ID (see 6.4.9.1)
Table 7: "Quick Setup" menue
6.4.3
"Adjustment" menue
The following functions are available for the temperature adjustment:
Menue entry
Description
Lower adjust.
Offset correction with applied reference temperature
Upper adjust.
Span correction with applied reference temperature
Table 8: "Adjustment" menue
