BA_084_2019-05_10.00 Temperature transmitter clamp-on
Page 19/20
6.4.9.1
Device ID
Using the device ID, you can show a custom text in the display if you configure the screen
mode accordingly (see 6.2.4). For instance, you can show the tag number continuously in
the display.
The device ID can be up to 16 characters long and consist of numbers, empty spaces,
capital letters and special characters.
For the selection, the characters are arranged in the order shown below. From the end of
the list (special character "@"), you are automatically guided back to the start (number
"0").
Character set:
0123456789 ABCDEFGHIJKLMNOPQRSTUVWXYZ[\
]^_!“#$%&‘()*+,-./:;<=>?@
6.4.9.2
Factory reset
When carrying out a factory reset, all parameters are set to the state at the time of deliv-
ery. This also includes the temperature and current adjustment. Exceptions are the follow-
ing operational parameters: “Min/max values”, “HART change counter” and “operation
hours”.
