Label NEXT 120s, Руководство по установке

Страница: 57 / 64

57
The internal radars of each door are used independently when the distance between the two doors is such that there are no interferences
in the detection field of the two internal radars.
● Set the function F26 = ON on both automations of the two doors.
● Select which of the two doors must open first in case of simultaneous command on both:
F27 = OFF : door opening 0.5 seconds after the command is issued.
F27 = ON : door opening immediately after the command is issued.
Decide which of the two doors must have opening priority and set on it
F27 = ON; on the other door set F27 = OFF.
● Select whether you want to save the opening command on the internal radar of the second door while the first one is still moving.
F28 = OFF : opening command saving disabled.
To open the second door the radar must be activated when the first door has closed back.
F28 = ON : opening command saving enabled.
To open the second door, the radar can be activated even when the first door is still moving;
the opening of the second one occurs automatically as soon as the first one has finished its closure.
● If you want that the second door opens automatically after a preset time if your radar is detecting a presence, even if the first door
has not yet closed, set the parameter P27.
P28 = 0% : the function is disabled and the second door opens only after the first one has closed back.
P28 = 01% : the second door opens 10 seconds after the opening of the first one if its radar is engaged.
P28 = 100% : the second door opens 2 minutes after the opening of the first one if its radar is engaged.
The interlock operation includes the following steps:
a.) the person approaching from the outside activates the external radar of door 1, and door 1 opens;
b.) the person enters the internal area between the two doors;
c.) door 1 closes back after the pause time;
d.) the person must activate the internal radar of the second door to get door 2 to open;
e.) door 2 opens when door 1 has closed back;
f.) the person enters through door 2 and that door closes back at the end of the pause time.
Operation when the person approaches from the opposite direction is the same.
To open the door even when the other is open, it is necessary to actuate the command on the OPEN input.
24.3) INTERLOCK APPLICATION WITH ELECTRIC LOCKS DISABLED WITH CLOSED DOORS
To enable this type of operation, set the function F29 = ON.
This application is used only when you install electric locks on the two interlocked doors and you want to keep them disabled when both
doors are closed (breakout condition).
In the automatic bidirectional and monodirectional work programs, when door 1 receives an opening command, the electric lock that
locks the leaf activates on door 2; the electric lock on door 2 is automatically disabled at the end of the closure of door 1.
Operation when the person approaches from the opposite direction is the same.
In the work program “Night lock” the electric lock is active when the door is closed, and in order to open the door it is necessary to issue
a command on the OPEN input.
To open the door even when the other is open, it is necessary to actuate the command on the OPEN input.
24.2) OPERATION OF THE INTERLOCK SYSTEM
DOOR 1
EXTERNAL RADAR
INTERNAL RADAR
INTERNAL RADAR
EXTERNAL RADAR
DOOR 1