manualshive.com logo in svg

Labcyte Echo 520, Руководство пользователя, Страница: 24 / 200

Поделиться
Скачать
Labcyte Echo 520 Скачать руководство пользователя страница 24

1-4

Echo Liquid Handler User Manual

1.1.2 Will the fluid splash or fall out?

The Echo liquid handler performs liquid transfer with an inverted 
destination plate. Users might question whether all of the droplet remains 
in the destination plate well after transfer. Will any of it splash out? Will the 
repeated motions of the destination plate, or simply time passing, allow 
any of the transferred liquid to fall or drain out of the destination plate 
well?

Pre-loaded 1536-well destination microplates will not experience fluid loss 
when they are inverted. Pre-loaded 384-well destination microplates 
containing fluid with low surface tension may experience fluid loss when 
inverted and should be tested. Pre-loaded 96-well destination microplates 
may experience loss of fluid when inverted, depending on fluid type and 
volume, and are not recommended for “wet” (pre-loaded) fluid transfers. 

Содержание Echo 520









































































































































































































Отзывы:

Нет отзывов