Labconco FlaskScrubber 4110010 Series, Руководство пользователя

Страница: 47 / 108

47
Copy and Edit a Program
1. From the Program Screen highlight the program you wish to copy by touching the
program line.
2. Touch [Copy] . An exact copy of the Program Screen will be displayed, except
the Program Name field will default to a new name.
3. To edit the Program Name, touch the Program Name field and type the new
name. Touch [OK] to save the new name.
4. To edit a segment, touch the value of the parameter you wish the edit. A pop-up
will appear to modify the parameter. Swipe up or down to change the value, then
touch
[OK] .
5. To delete a segment from the program, touch the segment, then touch the Delete
icon.
6. To add a segment to the program, touch the Add Segment icon. A pop-up will
display segments that can be added. Based on the washer model and/or
accessories installed, a limited number of specific segments are allowed
(limitations are found in Fig. 6-5). Segments added will automatically be ordered
correctly, for example a new Rinse segment will be placed after the final Wash
segment or if one or more Rinse segments already exist, will be placed after the
final Rinse segment. After selecting the segment to add, the Segment Wizard
will prompt you to enter each required parameter.
7. Once all required segments have been entered touch [Save] . The new program
will be listed at the top of the Program Screen when sorting by Last Modified .
Delete a Program
From the Program Screen select the program you wish to delete; the line will be
highlighted. If this is the correct program, touch
[Delete] , then confirm you are deleting
the correct program by selecting [OK] .
Factory programs are locked and cannot be deleted.
Sorting Programs
From the Program Screen touch either [Last Modified] or [Last Run] , notice each
touch toggles between the two selections. When [Last Modified] is displayed, the most
recently modified program will display at the top of the program list. When [Last Run]
is displayed, the most recently used program will display at the top of the program list.