Labconco 700821500, Руководство пользователя

Страница: 49 / 63

49
Shelf Temp Variation
This alert will be activated if the shelf temperature varies more than ± 3⁰C from the Shelf
Temp Set Point.
Shelf Temp Set Point
This alert will be activated if the shelf temperature stabilized without reaching the Shelf
Temp Set Point.
Program Complete
This alert will be activated when the last step of a running program has been completed.
Copy a Data Log File
Data Log Files can be copied to a USB flash drive via the USB port on the left side of
the freeze dryer. The file will be exported as a “comma separated values” file (.csv file
extension), which can be opened with a spreadsheet application program for data
analysis and graphing. To copy a data log file:
1. Insert USB flash drive into the freeze dryer USB port
2. Go to the Data Logging screen
3. Select the file that you want to copy by pressing the data log file name
4. Press the Copy button
Download Data Log Files via Ethernet
Data log files that are stored in the freeze dryer can be downloaded via an ethernet
connection. For this to be possible, a working ethernet connection must first be
established. The following steps must be completed:
1. An ethernet cable must be connected to the ethernet port on the back of the
freeze dryer and to a Local Area Network (LAN) with working internet service.
2. The proper settings must be entered into the Settings/Network screen to
establish a valid network connection (see description of Network screen in
Chapter 4).
3. Write down t
he “IP Address” shown on the Settings/Network screen of the freeze
dryer. This number will be used in Step 5.
4. Open an internet browser of your choice from a computer that is connected to
your LAN.
5. Type the following into the address bar at the top of the browser screen:
http://“IP Address”:8080 where “IP Address” represents the number written
down from the Settings/Network screen in Step 3 (example:
http://10.10.9.117:8080 ).