Labconco 700821500, Руководство пользователя

Страница: 44 / 63

44
Changing the Shelf Temp Set Point Value
If the tray dryer is already running in MANUAL mode and you want to change the
current Shelf Temp Set Point value:
1. Go to the Drying Accessory screen.
2. Press the MANUAL button.
3. Enter a new Set Point value and press APPLY.
Stopping Manual Mode
1. Go to the Drying Accessory screen.
2. Press the MANUAL button.
3. Press the STOP button.
4. The IN PROCESS LED indicator will turn off.
5. Turn off the vacuum pump.
6. Position the Vac Release valve to OPEN.
7. Allow the vacuum to bleed to atmospheric pressure, then open the door and
remove the samples.
8. Turn OFF the freeze dryer collector, defrost the ice, drain the collector chamber
and dry.
Program Mode
Before starting a program, ensure that the collector is ON and has been cooled to -
40⁰C
or below.
Starting a Program
1. Go to the Programs screen. You can access the Programs screen in two different
ways. Both lead to the same location.
a. Directly access the Programs screen by selecting the Programs icon from
the main menu bar at the top of the display.